Category Archives: DIY Clothing

Lego Belt

I used Lego a lot when I was younger, and wanted to do something with the stuff I had lying around. The end result was a Lego belt!

lego belt, belt, lego

What you need
* Plastic buckle
* Sheet of Lego (officially called the “baseplate”) cut up into squares that fit the size of your buckle
* Long piece of thick material to use as a belt
* Glue gun, for attaching the plastic parts together
* Scissors
* Needle
* Thread

How to do it
* Take the material for the belt and measure out how much you will need to wrap around your waist. Add some for comfort, and add some more to allow for hemming the ends.
* Put the material through the end of the buckle, and sew in place, with the end piece facing inwards (so you don’t see it when you’re wearing the belt)
* Hem the other end
* Cut a piece of the Lego sheet to fit the plastic buckle and glue it on
* Wait for it to dry, and wear it!

Ombre Dye

When making DIY ombre clothes the only difference is, instead of submerging the entire piece of clothing in the dye, you only put part of it in. Then you hold it and wait a few minutes… then you dip a bit more in and wait a few minutes… and then you do the same thing again.

The part you kept in the dye the longest will be darker, and the parts you left in the least will be lightest, giving your pillow a cute ombre dye tone.

ombre, ombre clothes, ombre dye, DIY ombre, DIY ombre clothes

You can do this with pillows, shirt sleeves, entire t shirts, pants, scarves, and anything else! Make ombre clothes for your friends with their favourite colours.

All you need is a piece of white clothing, some dye and a bucket or other place to do the dyeing in. Read the instructions on the package, and you’re ready to go!

Flag Clothing

You can make upcycled clothing out of almost anything.

Spenny from the TV show Kenny Vs Spenny made flag clothing during their Who is the Best Fashion Designer episode.

flag clothing, upcycled clothing, upcycling, upcycled, kenny vs spenny, spenny, fashion designer

Season 1, Episode 12 (S01 E12)

If you watch the episode, you can get other inspirations as well. Kenny used caution tape as a bra!

Would you consider upcycling fabrics or other stuff not commonly used for clothing?

Stencil T Shirt

Stencil art is simple!

t shirt, stencil, stencil t shirt, stencil art

To make a stencil t shirt this is all you need:
* T shirt
* Pencil or pen
* Paint
* Sponge
* Utility knife
* Cardboard (thin kind like from a cereal box is best)

How to do it:
* Draw out your design on the cardboard, then cut it out.
* Lay the shirt flat and place the cardboard ontop.
* Get some paint on the sponge (not too much – you don’t want the lines to bleed, and while you can always add more paint you can’t get rid of excess as easily) and put it on.
* Slowly lift the cardboard, making sure the shirt doesn’t move as you do this. Keep the shirt lying flat until it dries.

Button Belt

Do you have a bunch of buttons lying around? Make a button belt!

buttons, button belt, belt, kids

All you need is a long piece of thick string, and of course buttons! Make sure you tie a loop (triple knot it to make sure it’s secure) at the end before you begin, which is large enough for the last button you use to fit through.

This is a fun project for kids and people of all ages!

Simple Skirt

It’s can be simple to make a skirt…

skirt

This skirt was made using two pieces of semi-transparent material folded together.

What you need
– Material
– Elastic band (material – not the kind you use for paper or your hair!)
– Safety pin
– Pins
– Scissors
– Sewing machine (not needed, but really recommended) or needle and thread
– Iron

How to do it
– Measure your hips
– Cut material into a piece as wide as your hips, plus extra for seam allowance. When you cut for length remember about seam allowance for there as well.
– Hem the bottom, then fold the top part over and pin in place. You need to make sure this part is wide enough to allow for the elastic band to fit through, then sew.
– Measure a piece of elastic band equal to your hips, then attach a safety pin to the elastic band and ‘fish’ it through. Pin it together and sew the two ends together in a X shape with a box going around it.
– Pin the skirt ends together, so the seam is on the inside, and sew together. Be careful when you get to the top part, so you don’t sew the elastic part.
– Wear your sexy simple skirt!

Armwarmers or Legwarmers

Did some clothing re-construction on a long sleeved shirt for summer time, and don’t want to waste the sleeves? Make some armwarmers!

armwarmer

If you have a pair of pants with a worn out crotch, or if the leg part fit but the waist is too small, you could also make some legwarmers!

What you need
* Elastic band. This is a long piece of material; not the kind used for your hair.
* Needle
* Thread
* Sewing pins
* Safety pin

How to do it
* Flip the sleeve or leg inside out
* Fold the material over once, leaving enough space for the elastic band to fit. Add a bit more material for sewing allowance.
* Secure in place with sewing pins
* Sew, but not all the way around! You need a hole big enough for the band
* Attach the safety pin to the end of the elastic band, and fish it through the hole and around to the other side
* Pin the two ends of the elastic band together, and see if it fits snugly around your leg or arm
* Sew the band together, and then sew the hole closed
* Flip right side out, and wear your new creation!

– UPcycling Phoenix

Bleached Nature T-shirt

Bring part of the cottage or beach everywhere you go, with a bleached nature t-shirt.

bleach, t-shirt, stencil, nature, leaf

What you need
– Leaves
– Shirt
– Bleach
– Spray bottle
– Table or other flat surface
– Something heavy, like a book

How to do it
– Find some leaves on a nature hike
– Place the shirt on a table and put a sheet of paper inbetween the front and back (so the bleach won’t bleed through)
– Spray the leaf with some bleach on the more textured side
– Press down on the t-shirt
– Place a book ontop and let it sit for a while
– Rinse off the shirt before you try it on

Simple Shirt – Peekaboo Shoulders, Wide Neck, and Side Corset

This shirt incorporates multiple looks into one!

peekaboo shoulders, wide neck, side corset, simple shirt

This was originally a regular t-shirt with a iron on patch reading “Jesus is Alive”

What you need
– Shirt
– Bits from another shirt or fabric
– Pins
– Needle
– Thread
– Ruler (optional)

How to do it
– Cut the neckline really wide, cut down the sides up to the armpit, and hem the cut edges
– If you’re adding straps to create a “peekaboo shoulder” look, hem those as well, and sew on. Otherwise keep it as a wide neck, and move onto the next step…
– Pin the two sides of the shirt together. Cut *very small* holes on either side, and an even space from each other down the length of the shirt. I use the width of my ring, middle and pointer fingers as a guide, but you could use a ruler if you prefer.
– Take out the pins, Lace up the sides using long strips of fabric, and you’re DONE!